The Activator Method Chiropractic Technique is a chiropractic treatment method and device created by Arlan Fuhr as an alternative to manual manipulation of the spine or extremity joints. The device is categorized as a mechanical force manual assisted (MFMA) instrument which is generally regarded as a softer chiropractic treatment technique.
Physical characteristics of the activator device
The activator is typically a small handheld spring-loaded instrument which delivers a small impulse to the spine. With the release of the Activator V this process has changed from a spring-loaded grip to an electronic tool which delivers the mechanical force. It was found to give off no more than 0.3 J of kinetic energy in a 3-millisecond pulse. The aim is to produce enough force to move the vertebrae but not enough to cause injury.
Activator I was the first product patented by Activator Methods International in 1978. The Activator I is now used as a beginner instrument.
Activator II is a spring-loaded instrument which alongside the adjustment causes an activating of mechanoreceptors. The second spring-loaded instrument is the Activator IV, which has a pre-load function in order to elicit a higher co-activation of mechanoreceptors than the Activator II. The Activator IV is also the most researched Activator device.
Activator V is the newest iteration of Activator products and is a cordless instrument capable of delivering its own adjustment. It is the first FDA registered and approved cordless electronic chiropractic adjustment instrument.
Activator method chiropractic technique
The Activator Method Chiropractic Technique (AMCT) involves having the patient lie in a prone position and comparing the functional leg lengths. Often one leg will seem to be shorter than the other. The chiropractor then carries out a series of muscle tests such as having the patient move their arms in a certain position in order to activate the muscles attached to specific vertebrae. If the leg lengths are not the same, that is taken as a sign that the problem is located at that vertebra. The chiropractor treats problems found in this way moving progressively along the spine in the direction from the feet towards the head.
Leg length test reliability
Although prone "functional leg length" is a widely used chiropractic tool, it is not a recognized anthropometric technique, since legs are often naturally of unequal length, and measurements in the prone position are not entirely valid estimates of standing X-ray differences. Measurements in the standing position are far more reliable. Another confounding factor is that simply moving the two legs held together and leaning them imperceptibly to one side or the other produces different results. Fuhr claims that properly trained doctors show good interexaminer reliability.
Utilization rates
In 2003, the National Board of Chiropractic Examiners found that 69.9% of chiropractors used the technique, and 23.9% of patients received it. The majority of US chiropractic schools and some schools in other countries teach the AMCT method, and an estimated 45,000 chiropractors worldwide use AMCT or some part of the technique.
Results
There have been a number of studies of AMCT, including case reports, clinical studies and randomized controlled trials, but there are still unanswered questions. A few studies suggest that the activator may be as effective as manual adjustment in treatment of back pain.
See also
- Chiropractic treatment techniques
- Unequal leg length
References
