The history of steamboats on the Oregon Coast begins in the late 19th century. Before the development of modern road and rail networks, transportation on the coast of Oregon was largely water-borne. This article focuses on inland steamboats and similar craft operating in, from south to north on the coast: Rogue River, Coquille River, Coos Bay, Umpqua River, Siuslaw Bay, Yaquina Bay, Siletz River, and Tillamook Bay. The boats were all very small, nothing like the big sternwheelers and propeller boats that ran on the Columbia River or Puget Sound. There were many of them, however, and they came to be known as the "mosquito fleet."
Routes and operations
Rogue River
The Rogue River meets the Pacific Ocean at Gold Beach, and flows all the way from the Cascade Mountains. R. D. Hume was a pioneering businessman at Wedderburn and Gold Beach, then known as Ellensburg. By 1881, he had established a fish cannery and built a steam schooner, Mary D. Hume, to support the cannery operation. Hume was still conducting steamboat operations on the Rogue River in 1901, and in that year, Capt. E.D. Burns built the sternwheel steamboat Rogue River in Portland, and brought her down the coast to compete against Hume's operation. Mary D. Hume passed through several owners and was still in operation as late as 1939, when she was the oldest commercial vessel in service in the Pacific Northwest.
In November 1902, Burns succeeded in reaching deep inland on the Rogue to Agness, however, in returning to Gold Beach, on November 16, 1902 the boat struck a rock at Boiler Rapids, where, at least in 1966, her boiler was reported to be still visible. This was the only known effort to take a conventional vessel so far up the Rogue River.
In 1903 the gasoline-powered Success was built at Gold Beach for the Rogue River service. R.D. Hume continued his interest in shipping out of the Rogue River, commissioning the construction in 1908 of two small gasoline-powered schooners, Enterprise (22 tons) and Osprey (43 tons) from Ellingson in Coquille. Hume died by 1912, as his estate is reported to have sold Enterprise and Osprey to someone from Portland.
Coquille River
The Coquille River runs inland from Bandon. Before the era of railroads and later automobiles, the Coquille River was the major transportation route from Bandon to Coquille and Myrtle Point in southern Coos County.
Coos Bay
Coos Bay is a large and mostly shallow harbor on Oregon's southwest coast, to the north of the Coquille River valley. It is the major harbor on the west coast of the United States between San Francisco and the mouth of the Columbia River.
Two steamboat captains from the Columbia River began steamboat operations on Coos Bay in 1873. Inland riverboats were used to navigate the bay and the several rivers flow that flow into it. A mule-hauled portage was built between a shallow southern arm of Coos Bay and the Beaver Slough, a shallow north-extending branch of the Coquille River, in 1869; it was replaced in 1874 with a steam portage railroad. This connection established a convenient link between the steamboat operations of Coos Bay and those on the Coquille.
Numerous steamboats were built over the ensuing decades. In 1912, a number of steamboats were wrecked, by collision, fire and grounding on the sandbar at the mouth of the bay.
Umpqua River
The Umpqua River runs from Reedsport up through Douglas County. Gardiner is a town near the mouth of the Umpqua where several river steamers were built. One of the Umpqua River's several branches eventually reaches Roseburg, although the head of navigation was Scottsburg. Captain Godfrey Seymour began steamboat operations on the Umpqua River with Raftsman, later adding Washington, Swan, and Enterprise.
Swan was unique as the only steamboat to ever ascend as far as Roseburg on the Umpqua. This was in 1870, when the merchants of Gardiner were anxious to demonstrate the navigability of this river. Roseburg is 85 miles above the mouth of the river, and it took Swan 11 days to get there. This was sufficient to persuade Congress to allocate $70,000 for channel clearance of the Umpqua, even though no other steamboat ever again ran up to Roseburg.
In 1906, the propeller steamer Juno (32 tons) was built at Marshfield and placed on the Umpqua River service by the Umpqua River Steam Navigation Company.
- Scottsburg landing on Umpqua River, circa 1900, showing passengers and a number of small vessels
Siuslaw Bay and River
Siuslaw Bay is yet another large shallow bay on the Oregon coast, with its entrance about 24 miles north of the mouth of the Umpqua River. The Siuslaw River widens into the bay, which meets the ocean near the town of Florence. In 1890 or thereabouts, the Moonlight was placed in service on Siuslaw Bay and its various back channels.
- waterfront of Florence, Oregon, on Suislaw Bay, 1927
Yaquina Bay
Yaquina Bay, like Coos Bay, is another shallow coastal bay on the Oregon Coast. The principal town on Yaquina Bay is Newport. Once the Oregon Pacific Railroad reached Toledo, on the east end of Yaquina Bay, tourists started coming to the bay from the Willamette Valley. The roads were bad or nonexistent at the time, so the only way to the seaside hotels at Newport was to cross the Yaquina Bay by steamer. Propeller steamboats did most of this service, however in 1872, the sidewheeler Oneatta was launched at Pioneer, ran on the bay for a while and then was transferred to the Columbia River, and in 1882, to Humboldt Bay. Later, Rebecca C. and Cleveland also ran on Yaquina Bay.
Siletz River
The Siletz River runs into the Pacific about 30 miles north of Yaquina Bay, near the town of Taft now part of Lincoln City. The first salmon cannery was established on the Siletz River in 1896 by Daniel Kern, a Portlander. This was Kerns Bros. Packing Co., on the north side of the river. Later that same year the post office of Kernville was established in the same location, where a small town later developed. Kern brought in the small steamer Tonquin, 64' long, built at Portland, to act as a cannery tender and supply vessel. Kern later sold his cannery to Elmore Packing, of Astoria, and went into the marine construction business.
Much later, the Siletz Navigation Company operated on the Siletz, at least in the early 1920s. In 1923, Siletz (93 tons), described as a "strongly built diesel freighter" was launched at Kernville, Oregon, to serve local routes from the Siletz river entrance. This boat was probably more of an ocean-going vessel than the typical mosquito fleet craft, as she was sold to a Hawaii firm and voyaged there herself in 19 days without mishap.
Tillamook Bay
Tillamook Bay was a large very shallow bay on the northern part of the Oregon Coast. In 1911, the yacht Bay Ocean was built in Portland to provide service from Portland to Tillamook Bay for a beach resort. Bay Ocean was designed by R.A. Ballin for the T.B. Potter real estate company, which was developing the (eventually ill-fated) resort at Bay Ocean Spit on Tillamook Bay. Bay Ocean was the largest motor passenger vessel built to that date on the Pacific Coast. She was long (150') and narrow (18' beam), with a clipper bow and bowsprit. She had three gasoline engines connected to a single shaft. She could accommodate 50 passengers on the Portland-Tillamook route but had difficulty on the run and only served in the summer. She was called up by the navy to function as a patrol boat in the First World War. After the war, Bay Ocean was sold to Crowley Launch and Tug Co., of San Francisco.
- cannery tender Susan E. Elmore entering Tillamook Bay
- steamers Harrison and Susan E. Elmore at dock in Tillamook
Last operations
Mosquito fleet operations in the Coos Bay area and Coquille River valley continued up into the 1930s, due to the lack of good roads and other more modern transportation in these areas. As possibly the extreme example, the small (14 tons) gasoline-propeller Welcome, built 1919, was on the run up the Coos River from Marshfield to Allegany until 1948.
Steamboat graveyards
When steamboat service ended on the Coquille, at least three steamers, Myrtle, Telegraph, and Dora were all beached on the river near Bandon. See external link section below for image files showing the steamboat graveyard.
Astoundingly, the Mary D. Hume, built in 1881, is still largely intact, lying on the shore at Gold Beach, Oregon. The wreck itself is on the National Register of Historic Places.
- Wreck of the Mary D. Hume, at low tide
- another photo of the wreck of the Mary D. Hume
The steam ferry Roosevelt, which used to run on Coos Bay, was photographed abandoned near Marshfield in 1941.
- wreck of Roosevelt, steam ferry, near Marshfield
List of vessels
A large number of boats of all types were built on these waters, powered by various means, including steam, gasoline, and diesel engines. This index will attempt to track only vessels over 30 tons built before 1920, with exceptions where a vessel appears to be of more interest, due to an available on-line image or otherwise.
See also
- Columbia River Maritime Museum
- Historic ferries in Oregon
- Steamboats of the Columbia River
- Lists of Oregon-related topics
Notes and references
Notes
General references
- Newell, Gordon R., ed. H.W. McCurdy Marine History of the Pacific Northwest, Superior Publishing, Seattle, WA 1966
External links
Nautical Charts
- Coast Survey chart (no. 18568) of Tillamook Bay
- Coast Survey chart (no.18583) of Siuslaw River
Photographs
Coos Art Museum
- Victor West Collection of the Coos Art Museum Many good photographs of steamboats and small craft on Coos Bay and the Coquille River.
Historic images of Oregon Coast steamboats from Salem Public Library
- Alert at Allegany Landing on Millicoma River in Coos County
- Eva meeting the Drain stage, at wharf boat at Scottsburg on the Umpqua River
- steam launch Margaretta, Tillamook, Oregon, circa 1900
